How To Make Baby Headbands

DIY: How to Make Baby Headbands {Satin and Felt Flowers}

I like to make baby headbands. I did a ton of headbands before I had my little girl. One night my husband asked me to count how much he had made for our unborn child. I told him there weren’t that many. I still had 45 total after counting! I’ve made a lot more of him, I’m sure he’s over 75 years old. I love doing them. In reality, I was selling my made-up items in local boutiques. It is my passion! They are so fun creating that I can use my creativity. Lots of people have been asking me lately where I bought my headbands. I’m quick to tell them I make them all, so I decided to make a tutorial for my two favorite headbands so you can all make your own for a few dollars!

Felt flower headband:


  • Felt (to be found at Walmart 20.20 in the Kids Craft area)
  • Stretchy Elastic (Most local craft stores sell Stretchy Elastic. Usually, if you want a one-of-a-kind elastic band, Etsy is a good place to make more headbands for some of my innocent growing heads.)
  • Hot glue gun
  • pen

Start by drawing a circle first (I’m using the bottom of an ibuprofen bottle – it’s the right size). If you want to make 7 circles of equal size, cut them out

  1. Make a fold of the circle in half and then in half again. Glue a point in the fold. Repeat this process until you have 5
  2. Put the glue in one of the circles. “Flowers” begin to fold and stick to flat pieces. They will lie around the circle
  3. Any feel that you can carefully cut off on the outside of the flower is not even or stuck together
  4. The last piece that you glue to the folding tip is placed in the center of the flower
  5. You now want to measure your child’s head to determine the size of the rubber band that you want to cut. Make sure the headband is stripped. Cut off the headband and glue it together
  6. Take the flower you made and stick it on the ground. Place your headband (side up) on the bottom of the glue
  7. Glue your seventh piece and place them together on top of the headband sandwich.
  8. Glue your seventh piece and place them together on top of the headband sandwich! It is so easy.

Now for some more advanced things.

Satin flowers:


  • 1/4 meter satin fabric (available very cheaply at Walmart).
  • hot glue
  • Lighter
  • Pearls / Decorative (.99 for a pearl stand on Michael.
  • thread
  • needle
  • Stretchy elastic band
  • pen
  • Felt

First you want to cut different circles of different sizes (I get cups for measuring things in my kitchen like this one). I want to mark your circle with your pen

  1. Once your 6 circles are created, light up your brightly lit fabric (it’s important that you have a satin fabric so your fabric doesn’t catch the file). Warning: Please be careful not to burn yourself
  2. You slightly burned the edge of the fabric iteration with all 6 circles. Place your largest to smallest circles on top of each other
  3. Connect your needle and hand from the bottom of your circle. After going through the flower loop a few times, tie the bottom together. Next, glue your ornament on top of your stitch in the center of your flower
  4. Measure your baby’s head to determine the size you want to cut your elastic band. Make sure the headband is stripped. Cut the headband and glue it together
  5. Place your headband on top of the glue flower (see tutorial on the “good side” button above the good side).
  6. Measure the size of your flower and put the glue on the bottom of your flower. Feel that the piece is no bigger than your flower. Do it when it’s in the children’s minds. You don’t want to see the feeling
  7. Put down your piece of felt and put it all together!
  8. There you have it! You can buy less than two simple headbands!


5 DIY Baby Headbands and Bows

Headbands and bows have always been accessories for kids, but the classic look is definitely a moment. Here are five easy DIY tutorials to show you the headband trend this spring.

If you’ve recently seen a girl’s birth announcement, browsed Instagram, or shopped at ATC, you’re likely to see an adorable baby wearing an oversized headband or bow accessory. Like it or hate it, the trend is here.

While they still don’t have a lot of hair available, a drunk baby headband can add an extra touch of sweetness to any newborn’s outfit and photoshoot. The main part? You can easily make these headbands yourself and they can be completely customized to suit your tastes and preferences. These, too, are very easy to manufacture and very affordable. These also make a unique and personal DIY gift and you can even create a match for mom!

Whether you are in your nesting stage or have already greeted your little one, these DIY headbands are a great, convenient way to upgrade hair and add a touch of charm or personality. These five tutorials are quick and customizable, and you may already have some materials from previous DIY projects.

There are no sewing flowers

Make a statement from practical to practical with these classic floral headbands. You can mix or match the colors of your flowers and elastic bands for a unique personal look.

How to Make a DIY Baby Flower Headband SaveHow, sew your own DIY baby headband for practically no less than five minutes.


  • Scissors
  • Hot glue gun
  • Soft, stretchy, elastic
  • Fabric flowers


  1. Cut your elastic into shapes by adding about ½ “for the overlap. Cut an additional 1.5% piece of elastic to cover the overlap.
  2. Bring the two ends together, almost overlapping, and add some glued hot glue to hold the two ends together.
  3. Wrap a short piece of elastic around the overlap and apply a small dot of hot glue to hold it in place with the short piece on the shiny side.
  4. Add a point of hot glue to the seam by sticking the glue on the back of the flower.

Stretchy knitted headband

When it’s a bit cold this lovely messy thick headband will cover your little ears as well, and when they have a lot of hair to hold their hair in, it’s perfect.

SaveFrom One-to-One Consultation Support, our team gives you the tools and support you need to create an effective Pinterest marketing plan from the newly published consultant pinning tips and handling services


  • Stretch knit fabric (medium weight)
  • Rotary cutter
  • Cut the mat
  • Ruler


  1. Using a rotary cutter, cut a strip “5” long of fabric around the circumference of your baby’s head.
  2. Fold the long ends together, attach your hot glue gun, and leave a long tube.
  3. Stuff and glue together at one end.
  4. Repeat step 2 by cutting a wide “wide and 3” long piece of fabric.
  5. Fold the tube with the seam inward toward the front of the headband and repeat step 3.

Trendy knots

Grab your sewing machine and some old printed t-shirts for this super trendy tutorial on how she’s doing. You’ll want one for yourself too!

SaveContented Baby Head Tie with Free Pattern !! How can you separate your sewing machine and some old printed t-shirts for this super trendy tutorial? You want one for yourself too!


  • Template
  • Old t-shirt or desired fabric
  • Sewing accessories


  1. Print and cut the free pattern and glue the two pieces together.
  2. Using the pattern, cut the piece in two and place the pattern on the folded seam.
  3. Lay one on top of the other with the patterned sides facing in.
  4. Using the sewing machine, sew the template to the wing around the pieces of the headband. Sew the back, leaving the opening  ¾ “to rotate the headband to the right.
  5. Shape the headband and press with a flat iron to remove any shaking.
  6. Tie the end of the ribbon to the knot.

Fast arch without sewing

You don’t have to sew for those big, simple mom society arrows that are the perfect accessory for your little lady.


  • 6 “double fold bias tape
  • Fabric scissors
  • Nylon headbands
  • Hot glue gun


  1. Fine the bias tape through the headband, fold the bias tape down.
  2. Hold the long end of the bias tape, wrap it around you and your fingers, and then wrap it through the headband again.
  3. Slide it in and the loop in the middle is where you got your fingers.
  4. Drag one by one and set the perfect arc.
  5. Cut the edges of the helical thread tap and place a small point of eighteen between each fold to avoid blurring.

Mini turban

Turbans have been extremely on trend for the little ones lately, but if you’re not ready to pass them on to one of the designers, continue with this Ashley Charmed DIY strategy!

Ashley Newborn Baby Turban Hats by Sevennewburn Baby Turban Hat Glasses | Champed Ashley


  • Template
  • Jersey cotton fabric
  • Sewing materials
  • Hair donut


  1. Cut the needle along the curved edge of the pattern and leave it aside. Leave “in weaving”.
  2. Sew through the middle gap in the middle, tapping each pit to hold it firmly in an X pattern. Make sure that no raw edges are visible on the outside.
  3. Either leave or wrap the fabric around the donut, putting all raw edges aside and keeping as flat as possible.
  4. Sew the donut to the underside of the fabric on the raw side.


5 Easy DIY Baby Headbands for Your Little Bundle of Joy

Baby headbands look great and make your little one even more adorable. Today we’re going to show you how to make DIY baby headbands from the comfort of your home. You don’t need any sewing experience to make some of these and you will need some items around the house.

So what are you waiting for? It’s time for your creativity to flow and see what you can come up with. We are sure you will enjoy creating it. These headbands are perfect as a gift!

Baby headband size chart

You need to measure your baby’s head first before making any baby headwear. The circumference of the head determines how adequately the headbands are made. You want to make sure it’s not too tight or tight, but comfortable enough. Below is a baby headband size chart for your reference.

Age head rest size headband size

  • Newborn 12 inches to 13 inches by 12 inches
  • 0 to 3 months 13 inches to 15 inches 13 inches
  • 3 to 6 months 15 inches to 17 inches 15 inches
  • 6 to 12 months 16 inches to 18 inches 16 inches

You can make beautiful DIY baby headbands at home

1. Beautiful floral headband

Flower headbands are not only beautiful, they make your baby look divine too. Fortunately for you, these aren’t that difficult to do. We will tell you how to do it.

You will need

Here are the things you will need to make this headband:

  • Flexible elastic
  • Star and daisy trimmings
  • Scissors
  • Glue gun
  • A fabric flower


You may be wondering how to easily make headbands with flowers for kids, but this lovely answer is your answer. Here are the steps:

  1. Cut a strip of the sturdy elastic band the same length as the circumference of the baby’s head. Add an extra half an inch if needed.
  2. Create a floral applique pattern with daisy / star embellishments. Make sure the flowers are clumped together for a small cut. Glue them right onto the raw elastic band.
  3. Place an inch of space for a large flower in clusters of daisies.
  4. Glue the large fabric flower after gluing the daisy / star clusters.
  5. Secure the end of the Russian elastic band with an eighteen dollop and let it sit for a while.
  6. Your beautiful floral headband is ready and now you can put it on your adorable baby’s head!

2. Trendy DIY baby headband

There are some old T-shirts around the house? Don’t throw them away! You can use these to create a trendy baby headband. This is how you do it.

You will need

Before you begin, make sure you have gathered the following materials:

  • Old t-shirt or a recyclable fabric
  • Sewing accessories
  • Any pattern


The tutorial on creating baby headbands is the easiest and most popular when it comes to creating trendy models. That’s how it’s done:

  1. Cut a strip of fabric from an old t-shirt. You can use any old t-shirt around the house. Make sure you cut the fabric near the center of the t-shirt.
  2. The cut length should be about twice the size of your baby’s head for a comfortable fit.
  3. Make sure you have a sewing machine handy. Fold the fabric end to end and sew the ends together to the right. You can customize the design by sewing in additional patterns, elements, or styles at the top.
  4. Flip it over and flatten your headband with an iron. Put it on your baby’s head and you’re done!

3. Mini turban headband

A mini turban headband is a simple task that you can create for your baby. If you’re looking for how to make baby headbands with a large bow, you can change that too.

You will need

You need the following requirements:

  • Ruler
  • Needle
  • Hair donut
  • Thread
  • Every fabric has four sides


How to get started:

  1. Cut two strips of the desired length and width from the four-sided stretched fabric.
  2. Place a strip on the top right of the flat surface.
  3. Fold from the center to the length (now you have the wrong side of the fabric on the outside).
  4. Now sew it in the direction of the length.
  5. Follow the same steps as in the second strip.
  6. Now turn the two strips to get the right side of the outer fabric.
  7. Place them on a flat cross.
  8. Pick the right edge of the bottom strip, fold it over the top strip, bring it to the left, and hold it between your fingers.
  9. Now bring the top and bottom of the vertical strip to the right and hold it firmly between your fingers.
  10. You should get the knot of your turban in the middle.
  11. Now sew both ends together to form a loop.
  12. Smooth out the raw edges and curl
  13. Secure it with pins and hand sew carefully.
  14. Your mini turban headband is ready.

4. Knitted headband

This colorful headband made of knitted fabric meets mothers. It’s easy to do and looks adorable on all babies.

You will need

You can give them as gifts for your baby. You will need:

  • Knitted fabrics
  • Old shirt or maxi skirt
  • Cutting board


This lovely little headband doesn’t need any seams. We added another variation below, but let’s start with that now.

  1. Measure your baby’s head.
  2. Tie a loose bow and leave a loop in the baby’s head. Use safety pins to locate the knot.
  3. Pull on the loose edge to create a bunny bow and tie a tight knot.
  4. Trim any excess fabric around the loose edges and make sure they double up.
  5. Take the loose edge and press with your fingers to gather and fold the fabric.
  6. Look for a crease that covers all parts of the back of the arch.
  7. Use hot glue to hold the crease in place.
  8. Place the arch in the fold and flatten it. You did

5. DIY baby headbands have no stitches

These adorable floral baby headbands don’t require any seams. These are very easy to make and all it takes is a few minutes.

You will need

Here are the things you will need:

  • Elastic
  • Hot glue gun
  • cissors
  • Fabric flowers


  1. Before cutting the elastic, make sure you consider the size of your child’s head. Use the baby head reference chart above to determine this. You don’t want to cut in a way that it doesn’t fit and get too tight
  2. Fold 5 to 8 inches above the elastic. You can use shiny elastic band, thin elastic band, regular elastic band, or any elastic band of your choice. For other types of elastic, leave about 1 to 2 inches more, especially if you’re using lace elastics or something stiff.
  3. Keep about 2 inches for the overlap and an additional 1.5 inches for the cover.
    Secure the edges of the elastic and secure the overlaps with hot glue. You can cover the seam by gluing an extra layer of elastic tape with a small dot of hot glue on the overlap.
  4. Attach the flower fabric to the seam / overlap with a dash of hot glue. Gently secure it in place and add glue to the elastic gloss so that it is hidden by the seam
  5. Let it dry and when it’s ready you can apply it on your baby and make it look beautiful

Now that you know how to make these gorgeous DIY kids headbands, it’s time for your creative juices to flow. Take the time to collect your supplies and visit your local craft store. For some of these, you can use a variety of recyclable fabrics and create your own version. Because when you are making headbands for your baby, you want to make sure that they are special. And that means creating pieces that are exclusive, original, and something you can’t get in any designer store. Hopefully the simple DIY headbands mentioned above will help you get started. Good luck and let us know how it went.